What technical information do you have on the Electric powertool?

What technical information do you have on the Electric powertool?

Yes! We have the Electric tool to install inserts available!

It has the same functionality as the pneumatic tool 3352PTC.

The electric tool works with a battery instead of compressed air.

With 1 battery you can install approximately 300 Keenserts of the M6 size.

However, depending on several factors, this can change significantly: the hardness of the parent material, preparation of the hole, etc.

1 battery takes about 45 minutes to recharge.

An advantage of the Electric tool is that it is lighter.

This is due to the fact that the tool is mostly made out of plastic instead of the Aluminum casting.

Although, the handling feature is the same as the pneumatic tool:

press the tool against the insert to turn the insert in the hole

press the trigger in order to push in the kees and turn the tool out of the hole.

The electric tool also has a bigger nut to fit a bigger type of nose piece: KN813J and KN820J

This will also work on the pneumatic tool, however a bigger nut will need to be provided.

For other advantages, you can look into the blog about the pneumatic tool

3352PTC

For more infomation, please contact us on info@anemo.eu