Which are the longer stud lengths in 50F 900N that are available?
- English
- Français
- Nederlands
- Español
- Deutsch
- Português
50F-900N series length number of the stud is determined by calculating the total thickness of the plates, depending on the type of the receptacle, use of grommet...
| Total Thickness G (mm) | Type 1 receptacle | Type 2 receptacle |
| F= 1.0-2.1 | F=2.1-3.0 | |
| 0.5-1.1 | 5 | 7 |
| 1.1-1.7 | 6 | 8 |
| 1.7-2.3 | 7 | 9 |
| 2.3-2.9 | 8 | 10 |
| 2.9-3.5 | 9 | 11 |
| 3.5-4.1 | 10 | 12 |
| 4.1-4.7 | 11 | 13 |
| 4.7-5.3 | 12 | 14 |
| 5.3-5.9 | 13 | 15 |
| 5.9-6.5 | 14 | 16 |
| 6.5-7.1 | 15 | 17 |
| 7.1-7.7 | 16 | 18 |
| 7.7-8.3 | 17 | 19 |
| 8.3-8.9 | 18 | 20 |
| 8.9-9.5 | 19 | 21 |
| 9.5-10.1 | 20 | 22 |
| 10.1-10.7 | 21 | 23 |
| 10.7-11.3 | 22 | 24 |
| 11.3-11.9 | 23 | 25 |
| 11.9-12.5 | 24 | 26 |
| 12.5-13.1 | 25 | 27 |
| 13.1-13.7 | 26 | 28 |
| 13.7-14.3 | 27 | 29 |
| 14.3-14.9 | 28 | 30 |
| 14.9-15.5 | 29 | 31 |
| 15.5-16.1 | 30 | 32 |
| 16.1-16.7 | 31 | 33 |
| 16.7-17.3 | 32 | 34 |
| 17.3-17.9 | 33 | 35 |
| 17.9-18.5 | 34 | 36 |
| 18.5-19.1 | 35 | 37 |
| 19.1-19.7 | 36 | 38 |
| 19.7-20.3 | 37 | 39 |
| 20.3-20.9 | 38 | 40 |
| 20.9-21.5 | 39 | 41 |
| 21.5-22.1 | 40 | 42 |
| 22.1-22.7 | 41 | 43 |
| 22.7-23.3 | 42 | 44 |
| 23.3-23.9 | 43 | 45 |
| 23.9-24.5 | 44 | 46 |
| 24.5-25.1 | 45 | 47 |
| 25.1-25.7 | 46 | 48 |
| 25.7-26.3 | 47 | 49 |
| 26.3-26.9 | 48 | 50 |
| 26.9-27.5 | 49 | 51 |
| 27.5-28.1 | 50 | 52 |
| 28.1-28.7 | 51 | 53 |
| 28.7-29.3 | 52 | 54 |
| 29.3-29.9 | 53 | 55 |
| 29.9-30.5 | 54 | 56 |
| 30.5-31.1 | 55 | 57 |
| 31.1-31.7 | 56 | 58 |
| 31.7-32.3 | 57 | 59 |
| 32.3-32.9 | 58 | 60 |
| 32.9-33.5 | 59 | 61 |
| 33.5-34.1 | 60 | 62 |
| 34.1-34.7 | 61 | 63 |
| 34.7-35.3 | 62 | 64 |
| 35.3-35.9 | 63 | 65 |
| 35.9-36.5 | 64 | 66 |
| 36.5-37.1 | 65 | 67 |
| 37.1-37.7 | 66 | 68 |
| 37.7-38.3 | 67 | |
| 38.3-38.9 | 68 |
| Total Thickness G | Type 3 receptacle |
| 2.3-2.9 | 5 |
| 2.9-3.5 | 6 |
| 3.5-4.1 | 7 |
| 4.1-4.7 | 8 |
| 4.7-5.3 | 9 |
| 5.3-5.9 | 10 |
| 5.9-6.5 | 11 |
| 6.5-7.1 | 12 |
| 7.1-7.7 | 13 |
| 7.7-8.3 | 14 |
| 8.3-8.9 | 15 |
| 8.9-9.5 | 16 |
| 9.5-10.1 | 17 |
| 10.1-10.7 | 18 |
| 10.7-11.3 | 19 |
| 11.3-11.9 | 20 |
| 11.9-12.5 | 21 |
| 12.5-13.1 | 22 |
| 13.1-13.7 | 23 |
| 13.7-14.3 | 24 |
| 14.3-14.9 | 25 |
| 14.9-15.5 | 26 |
| 15.5-16.1 | 27 |
| 16.1-16.7 | 28 |
| 16.7-17.3 | 29 |
| 17.3-17.9 | 30 |
| 17.9-18.5 | 31 |
| 18.5-19.1 | 32 |
| 19.1-19.7 | 33 |
| 19.7-20.3 | 34 |
| 20.3-20.9 | 35 |
| 20.9-21.5 | 36 |
| 21.5-22.1 | 37 |
| 22.1-22.7 | 38 |
| 22.7-23.3 | 39 |
| 23.3-23.9 | 40 |
| 23.9-24.5 | 41 |
| 24.5-25.1 | 42 |
| 25.1-25.7 | 43 |
| 25.7-26.3 | 44 |
| 26.3-26.9 | 45 |
| 26.9-27.5 | 46 |
| 27.5-28.1 | 47 |
| 28.1-28.7 | 48 |
| 28.7-29.3 | 49 |
| 29.3-29.9 | 50 |
| 29.9-30.5 | 51 |
| 30.5-31.1 | 52 |
| 31.1-31.7 | 53 |
| 31.7-32.3 | 54 |
| 32.3-32.9 | 55 |
| 32.9-33.5 | 56 |
| 33.5-34.1 | 57 |
| 34.1-34.7 | 58 |
| 34.7-35.3 | 59 |
| 35.3-35.9 | 60 |
| 35.9-36.5 | 61 |
| 36.5-37.1 | 62 |
| 37.1-37.7 | 63 |
| 37.7-38.3 | 64 |
| 38.3-38.9 | 65 |
| 38.9-39.5 | 66 |
| 39.5-40.1 | 67 |
| 40.1-40.7 | 68 |
All parts range from 1 to 45 and also 50, except:
| 50E70-*AGV |
| 50E18-*AGV |
These parts only go from 5 to 25
| 50E80-*CP |
| 50E82-*CP |
These parts only go from 2 to 39 without 35, 36, 37, 38
These parts have a range from 2 to 61 and also 66
Note: the numbers that aren't mentioned are not possible to be made by cold forging, however it is possible with a sub-contractor on a turning table.
Non-standard parts have a lead-time of 10-12 weeks
For more information, contact our engineering team.
Tags: