Camloc Gas Spring
ANEMO is official distributor for the camloc gas spring range.
Minimum order quantity = 10 pieces
Lead time to manufacture Camloc Gas springs = 3-5 weeks
|Camloc Gas Spring - Swift-Sure|
|Camloc Gas Spring - Econoloc|
|Camloc Gas Spring - Stop-Stay|
|Camloc Gas Spring - Stainless Steel|
|Camloc Gas Spring - End Connectors|
(scroll down for VARI LIFT and CAM STAY : new products)
Camloc Gas springs are a sealed energy source containing a pressurized inert gas (Nitrogen) and a small amount of oil. Camloc gas springs may be fixed at any place ( every pressure is possible between the range of the Camloc Gas Spring type).
The Camloc Gas spring consists of a pressure cylinder (filled with Nitrogen and oil) in which slides a piston-rod sub-assembly. The self-contained pressured gas generates an axial force on the cylinder-rod system, making the whole device work as a compression spring. The rod speed is always under control with added dampening effect near the end of the rod extension stroke. Its weight is destined for lifting and balancing loads, its specific duty is counter weighting.
Camloc Gas springs with their easy to use, comfort and easy installation, ensuring your products are improved further.
There is almost always one Camloc Gas spring in dimension and strength suitable for your specific purpose, we are at your disposal in any technical support and will help you during application stage.
Camloc fittings are screwed
Operating temperatures range from -30°C to +80°C
Working cycles per minute: maximum quantity of 6 full reciprocating strokes. For higher rates please contact us.
Endurance behaviour based on 30.000 working cycles test: 15 % maximum performance loss (actual test results will vary according to stroke length and nominal force value).
Nominal data is given for +20°C reference temperature, For each step of 10°C, force variation is 3.4 %.
For example: F1 nominal force of 500N (at+ 20°C) will become 525N at +35°C and 440N at -16°C.
NEW: VARI LIFT GAS SPRING
VARI‐LIFT is an adjustable force gas spring that can be set to meet individual preferences. It can also be adjusted whilst in position on the application, saving you both time and effort.
All Swift & Sure, Econoloc, Stop & Stay and stainless steel gas springs are available in a VARI‐LIFT version which can be adjusted to meet individual preferences as well as being adjusted in‐situ.
The gas springs are charged to their maximum force during manufacture. By using the tool provided, gas can be gradually released via the valve at the end of the tube to provide the force suited to your application.
VARI‐LIFT gas springs can be used during product prototyping to attain the required force for fixed force production gas springs. They can also be used where the weight of your products vary between models and can be degassed to provide the perfect action for your needs.
The Cam Stay:
The Cam‐Stay is our easy‐to‐use telescopic multi‐positional stay – providing quick and steady positioning.
more information about cam stay
Ideally suited for a wide range of applications where a weight must be held or supported at various angles,
the Cam‐Stay comes in three versions:
- Basic with 5 locking positions ‐ Part Code: 00‐5520‐05
- Basic with 10 locking positions ‐ Part Code: 00‐5520‐10
- Reversible with 6 locking positions ‐ Part Code: 00‐5520‐06
All Cam‐Stay telescopic positioning stays are universal and can be mounted with the holding slots mounted up or down. Mounting of the stays can either be directly to your application through the holes or by mounting brackets.
- Easy Installation
- Maintenance free
- Supports up to 135kg
- Up to 10 Positions
- Life Expectancy: 20,000 Locks
Camloc is a registered brand name from